Xeni-Audio - Busbar - Purchase
by Tony CUNY
€39
Busbar: every track, one machine
A saturation plugin where all your instances share a single analog machine. The supply is common: what goes through one channel is felt by all the others.
Put a saturation plugin on six tracks and you get six saturators: six boxes doing their thing, deaf to each other. A console is not like that. Every channel hangs off the same power supply and the same clock, and that is where the glue comes from: the desk moves as one body.
Busbar is that machine. Drop it on the drum bus, the bass, the guitars, the vocal — they do not become six independent plugins. They become six channels of the same machine, drawing on the same rail and drifting on the same time base.
How it works
Every Busbar instance publishes how hard it is pushing. The sum of all those demands makes one shared rail sag, which lowers the saturation ceiling of every channel at once. When the chorus lands and everything pushes harder, everything compresses together - not six unrelated amounts, one shared amount.
On top of that, one shared drift: all channels undulate in step, instead of N de-correlated flutters smearing against each other.
That is the one thing a per-track plugin cannot do, however good it is.
The gesture that defines it
Each track has two sides: what it draws from the supply (published to everyone) and what it takes from the sag (its own business). A track with ANCHOR engaged keeps loading the rail (it still makes everyone else dip) but does not dip itself.
> The lead vocal must not duck. But it must make everything else duck.
That sentence is not possible in any other saturation plugin. Here it is one switch.
Six characters, each modeled on a measured unit
The machine has one character, shared by every track and each track chooses its own dose with its DRIVE.
bus — wide, forgiving
valve — vocal, coloured
silicon — fast, aggressive
reel — tape: odd harmonics and drift — the default
iron — dense, iron-fisted
oxide — rounded, gentle
The shapes come from measurements of the actual hardware, and the six are level-matched: switching characters changes the sound, not the loudness. An ADVANCED drawer opens the shape itself (bias, knee, tilt, the input transformer's high-pass and bump) plus SAG depth, DRIFT depth and oversampling.
You can watch it happen
Across the middle of the window runs a copper bar: the rail. It gets thinner under load. Below it, a stacked meter shows who is pulling (your own share in the lighter tone) so you watch your track dip because of the others.
Below that, the park: one lane per channel on the machine. Click another lane and you take that track's controls without leaving your window — a violet EDITING band tells you where you are, and the change reaches the other instance even if its window is closed. Double-click a lane to rename it.
Also in the box
Machine presets: a preset carries the machine only, never a track's drive, mix or anchor: recalling one can never flatten the balance of six tracks in one gesture. The library is shared and live across all instances.
A/B of the whole desk and global undo: one press moves every instance, because the change was never local in the first place.
MATCH: level-matched bypass, on by default, so an A/B proves what the machine does and not how much louder it made you.
DELTA: hear only what the machine adds. The panel turns violet so you cannot forget it on.
Each listening aid exists per-track and machine-wide (`All`): a whole-machine, level-matched bypass from a single window.
QUALITY: ×1 / ×4 / ×8 oversampling.
A help bar: hover any control and it tells you, in plain English, what it does.
Resizable window, and a full user manual (PDF).
What Busbar is not
Busbar is not a faithful emulation, and it is worth saying plainly. The shared sag exists on no hardware - outboard designers build power supplies against exactly that, and the two units we measured showed 0.000 dB of inter-channel coupling. The drift, at the setting that sounds best, is around a hundred times the spec of a tape machine.
It is a deliberate effect. That is also precisely what makes it hard to copy: a plugin that models one box faithfully can never do this, because the thing being modeled refuses to.
Try before you buy
Busbar has a free demo, and it is the full plugin: every feature, every preset, your settings saved. The only limit is that the audio mutes for a few seconds every minute, on every instance at the same moment, because of course it does.
Grab it from https://xeni-audio.com (or from the free Busbar demo page here on Gumroad), install it, and run it on a real session for as long as you like.
When you're convinced, buy your license on this page. You'll receive a key — paste it into the license field in the panel, and one instance is enough: the others notice within a tick and unlock with it.
Your license is permanent, works on all of your machines, and includes free updates. No subscription, no online check every time you open a session, no account to keep alive.
Specs
Formats: VST3, CLAP (Windows, macOS, Linux) and AU (macOS)
macOS: universal — Intel and Apple Silicon (M1/M2/M3/M4)
Windows: installer or portable ZIP
Linux: VST3 + CLAP
Stereo in / stereo out
Up to 64 instances on one machine
Full user manual (PDF) included
macOS: signed with an Apple Developer ID and notarized by Apple — it just opens. The publisher reads "Tony Cuny", the legal name behind Xeni-Audio. Windows: the installer is not signed yet, so SmartScreen may say the publisher is unknown — "More info" → "Run anyway", or use the portable ZIP instead.
Busbar — Changelog
1.1.3
Fixed: hovering a knob in the ADVANCED panel (Bias, Knee, Tilt, HPF, Bump, Narrow) now explains it in the info bar.
Fixed: the info bar now also explains the Save button, the "Back to this track" button, and the lanes of the park.
1.1.2
Sound unchanged: bit-identical to 1.1.1 at every normal sample rate.
Fixed: invalid output (NaN) at host sample rates below about 27 kHz (22.05, 16, 8 kHz).
Windows: fixed the editor possibly failing to open without a hardware GPU driver (Remote Desktop, virtual machines).
1.1.1
Fixed: resizing Busbar by dragging the host's own window frame no longer distorts the interface. It stretched freely before, because the constraint that locks the aspect ratio was the one path Busbar never answered — the host's live drag goes through it, and Busbar let it through unchanged.
Fixed: the size you set from the host's window frame is now remembered when you close and reopen the editor.
Fixed: on macOS, Busbar was not following the host's window frame at all — neither of the two fixes above existed there. It now behaves the same on macOS, Windows and Linux.
Xeni-Audio — https://xeni-audio.com